TG020-OTP20 OTPоƬ Ʒ
Ʒ:
TG020һ֧PWMDAC20OTPоƬ,ЧãĸI/O,2Input,2I/O,I/OֻܴƣΧһ104ݣƷɱ.AC
DataSheetԭͼTG020 -- TG020ԭͼ AC
Description
TG020 is a 20 Sec Easy Use Speech IC .It Support PWM or DAC voice output with high quality speech , There are 20 second Voice Length under 6 KHz sampling and 4 bit hardware compression. Its internal built-in a oscillator for system clock without an external resistor. Maximum 63 voice groups. One Group contain several steps(voice section ); Maximum 700 steps for all the Groups. Each Step can be define Trigger Mode, Output Status, Voice Section, Mute length, I/O Type & Simple Programming Function. User can select 8bit / 5bit / 4bit data compression. Support three mode trigger IC (Stand Alone, Serial Trigger Mode, CPU Command Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the USB Port .
Functions
- MAX voice file : 700
- MAX Trigger Groups : 63
- Power On Trigger Group :1
- MAX Step : 700
- Signal step mute length : 0.64 s ( 6k sample rate )
- Operating Voltage range: 2.4V ~ 3.6V
- Total Voice Duration : 20 (120K Samples)
- I/O pin : 4
- Voice output : PWM or DAC
- Sequential Key : TG1 -> 32 Groups.
TG2 -> 29 Groups.
TG3,TG4-> 1 Group
- Debounce time : 50 us or 10 ms
- On/Off function : only for all TG PIN
- Sequential Key for Volume control function.
- Step can change Trigger I/O Type, Trigger Mode & Output Status.
- Hardware Trigger Group Repeat function.
- Simple Programming Function :
- (a) Write data to working register.
- (b) Working Register Increasing.
- (c) Step Jump by Working Register / Volume Status.
- Three Mode Trigger IC :
- Key Stand-alone Trigger Mode :
- Edge/Level
- Hold/Unhold
- Retrigger/Irretrigger
- Serial Trigger Mode :
Combinations of TG1 and TG2 to trigger maximum 63 Voice Group.
- CPU Command Mode :
User command through TG1,TG2,TG3 & TG4 with serial CPU Interface to control the Multi-Playback function.
- Output status (for each Output pin):
- Stand by Status. (High/Low Status)
- Busy Low Active.
- Busy High Active.
- LED Flash at 6 Hz.
- LED Flash at 3 Hz.
- LED Flash at 1.5 Hz.
- LED Flash at 0.75 Hz.
- PWM for LED Dimming Control.
- Play rate level :
TG020 can provide different play rate in one code as follow below Reference Sample Rate.
3K, 3.2K, 3.31K, 3.42K, 3.55K, 3.69K, 3.84K, 4K, 4.17K, 4.36K, 4.57K,
4.8K, 5.05K, 5.33K, 5.64K, 6K, 6.4K, 6.85K, 7.38K, 8K, 8.72K, 9.6K, 10.66K, 12K, 13.71K, 16K, 19.2K, 24K.
- TG2 Low Reset
- TG3 Volume Control
TG020 Pad Location
CHIP SIZE: (0, 0) (1734,715) UM
NO. |
PAD NAME |
X |
Y |
NO. |
PAD NAME |
X |
Y |
1 |
TG2/RSTB |
-777 |
-184 |
6 |
VSS |
440 |
-266 |
2 |
TG1 |
-777 |
-270 |
7 |
PWM1 |
793 |
-288 |
3 |
TG3 |
-605 |
-267 |
8 |
VDD |
796 |
-204 |
4 |
TG4 |
-520 |
-267 |
9 |
PWM2/DAC |
793 |
-119 |
5 |
VSS |
256 |
-271 |
|
|
|
|
PIN Descriptions
PIN NAME |
I/O |
Function |
TG1 |
INPUT |
Key Stand-alone Trigger Mode : TG1 is used to trigger the maximum 32 Voice Group one by one sequentially. |
Serial Trigger Mode : TG1 is used to trigger the maximum 63 Voice Group. |
CPU Command Mode : TG1 is used as Data Input Pin (CS). |
OUTPUT |
As Output PIN , Output the BUSY or Flash Signal ./By Code Control |
TG2/RSTB |
INPUT |
Key Stand-alone Trigger Mode : TG2 is used to trigger the maximum 21 Voice
Group one by one sequentially. |
Serial Trigger Mode : TG2 is used to trigger the maximum 29 Voice Group |
CPU Command Mode : TG2 is used as Clock Pin (CLK). |
TG3 |
INPUT |
Key Stand-alone Trigger Mode : TG11 is used trigger Only One Group. |
CPU Command Mode : TG11 is used as Data Input Pin (DIO1). |
OUTPUT |
As Output PIN , Output the BUSY or Flash Signal ./By Code Control |
TG4 |
INPUT |
Key Stand-alone Trigger Mode : TG4 is used trigger Only One Group. |
CPU Command Mode . TG4 is used as Selected Pin (DIO2). |
OUTPUT |
As Output PIN , Output the BUSY or Flash Signal./By Code Control |
PWM1 |
OUTPUT |
As a PWM PIN , can Directly drive the Speaker . |
PWM2 |
OUTPUT |
As a PWM PIN , can Directly drive the Speaker . |
As a DAC PIN , 8 bit D/A Current Output. |
VDD |
INPUT |
Power Supply PIN , @ 2.4~3.6 V Working Voltage. |
VSS |
INPUT |
Connected to Ground. |
Ʒƣ
1,
Otp-TG020 õ衢ΧûԪΧ·ֻҪҪ104ݣ
ķøʡ30%50% .
2, ѹ2.4V3.6VʽPWMDAC .(Ӧ5VʱҪLDOѹоƬ)
3, гΨһһ8PinDIP,SOPװOTPоƬ.AT@CHIP
4, Ψһһ¼ƬOTPоƬƷ,ַ,ʺ͵г.
ʽ
dip SOPCOBΪѹרãƬ¼ã ƬһWaferͬʱ¼4ͬIJƷֱӰؽԼʱ, dip SOPCOB 1콻Ƭ5-7콻
DataSheetԭͼ -- TG020ԭͼ
һ¼оƬ/OTP
زƷAC8040-OTP40 AC8020-OTP20 AC8080-OTP80
²Ʒ: AC9020-OTP20 AC9080-OTP80 AC9010-OTP10
Other: TG010 TG020 TG040 TF020 TF040 TH040 TH080
²ƷϵOTPоƬȫ֧4.5V3V,Ϊṩȶ.
оƬƬŶӽ߳ΪͬʱǽõIJƷͼ۸ΪҵõIJƷЧ档ӭѯ!
ƽȻԭڴЯֺԻ͡
оƬƬ TG020-OTP20 |
